COMBICOLOR® ORIGINAL AEROSOLS
- Primer and topcoat in one
- For application onto rust, bare metal
- High coverage: 10.5 m² per litre
- Sag resistant, no brush strokes
- White spirit dilutable
- Usable down to 5°C
COMBICOLOR® THINNER STANDARD
- Easy to pour
- Reclosable packaging
- Special for CombiColor Original and Hammertone, also for cleaning and degreasing
COMBIPRIMER® ADHESION PRIMER
- Easy to apply
- Transparent blue finish
- Recoatable after just 30 minutes
- Very high coverage: 50 m²/l
COMBIPRIMER® ANTI-RUST PRIMER
- Recoatable after 2 hours
- For new / slightly rusted surfaces
- Grey for light coloured topcoats
- Red for dark coloured topcoats
COMBIPRIMER® ANTI-RUST PRIMER AEROSOL
- Recoatable within 1 hour or after 48 hours
- For new / slightly rusted surfaces
- Grey for light coloured topcoats
- Red for dark coloured topcoats
COMFORT SPRAY GRIP
- Ergonomic design
- Large soft touch trigger
- Durable construction
- For all HARD HAT® aerosols
DAC HYDRO PLUS
- Quick, easy to apply and affordable
- No need for a special primer on concrete
- Cost effective coverage: 10m²/L
- Lasting gloss and colour
- Rain-proof after just 2 hours
- Water-based formulation, low odour
DACFILL®
- For many sloped (min. 5%) roof types: bitumen, cementitous, asphalt, plastics
- 100% watertight high build coating
- Resistant to UV radiation, acid rain, heat, frost and pollution
- Safe and easy to use
- Easy to apply with a brush, roller or airless spray
DACFILL® FLEECE
- Improves mechanical strength in Dacfill® or Dacfill® HZ systems
- Improved waterproofing
DACFILL® HZ
- Quick drying 100% watertight coating
- Resistant to UV radiation, acid rain, heat, frost and pollution
- White colour reflects most sunlight
- Non-flammable and self-extinguishing
- Seamless elastic finish lasts for years
- Easy to apply with a brush, roller or airless spray
DECORATIVE COLOUR CHIPS
- Durable
- Mix and match chip blends to customize your color scheme
- Helps to hide dirt and surface imperfections
EPOXYSHIELD® CLEANER/DEGREASER
- Removes grease, oil and other contaminations
- Virtually odour free
- Non-flammable
- 6-8 m²/l coverage
EPOXYSHIELD® CONCRETE REPAIR MORTAR
- Traffic allowed after 24 hours
- Recoatable after 48 hours
- 10 kg (1-component) – 0.4 m²
- Sandable to a smooth finish
EPOXYSHIELD® FINE CRACK REPAIR MORTAR
- Solvent-free Epoxy (2-part)
- For repairing fine cracks up to 3 mm wide
- Dry in 3-4 hours
- Coverage: 25 linear metres (2mm wide, 5mm deep)
EPOXYSHIELD® GARAGE FLOOR COATING
- 2-part water based epoxy
- Complete kit including instructions
- Resists gasoline, antifreeze, motor oil, salt and hot tire pick-up
EPOXYSHIELD® MAXX + ADDITIVES
- Water based
- For medium to heavy traffic
- Easy to apply, no primer required
- Long-lasting gloss finish (Non-skid or decorative finish optional)
- Highly resistant against solvents, chemicals and car tyres
EPOXYSHIELD® SEALER
- Single pack, easy to apply
- Non yellowing clear finish (gloss)
- Touch dry after just 1 hour
- Ideal primer for EpoxyShield® ULTRA coatings
EPOXYSHIELD® ULTRA
- For light to medium traffic
- Easy to apply
- Touch dry after just 2 hours
- Satin matt finish
- Good resistance to car tyres and various chemicals
FILLCOAT® FIBRES WATERPROOFING
- Repairs holes and cracks up to 2mm instantly
- Excellent adhesion to various substrates
- Can be applied in all weather conditions
- Direct repair of gutters, roofs, chimney stacks, pipes and more
- Bitumen-free formula
FILLCOAT® WATERPROOFING
- Thick elastic waterproof coating
- Excellent adhesion to various substrates
- Can be applied in all weather conditions
- Renovation of weathered roofs
- Can be applied by brush, roller or airless
- Bitumen-free formula
GROUND MARKER XL RAL
- Optimised for ground marking
- Extra large can for more linear metres
- Two finger nozzle for accurate writing
- Quick drying (5 - 10 minutes)
HARD HAT® ADVANCED
- Ultimate quality Primer & Topcoat in 2 in1
- Strong corrosion protection
- High colour retention
- Flexible - doesn't peel off
- High chemical resistance
HARD HAT® ANTI-CORROSION PRIMER
- Ready to recoat within 1 hours or after 48 hours, to handle after 30 min.
- For new or slightly rusty surfaces
- Penetrates deeply into the surface and does not give rust a chance
- Grey for light coloured topcoats and red for dark coloured topcoats
HARD HAT® GALVA EXPRESSE
- Protection and quick drying in one
- Tack free after just 5 minutes, to handle after 10 minutes
- Ideal for production and construction environments
- Resists 400 hours of salt spray testing (DIN 50021 SS)
HARD HAT® GALVA PLUS
- Appearance similar to new galvanised
- For touching-up new galvanised
- Resists 310 hours of salt spray testing (DIN 50021 SS)
- Lower zinc contents, more aluminium
HARD HAT® GALVA ZINC
- Cathodic protection of bare and galvanised steel
- 90% pure zinc in dry paint film
- Resists 500 hours of salt spray testing (DIN 50021 SS)
- To recoat within one hour, brush version after 4 hours
- To recoat with HARD HAT® metallic sprays
HARD HAT® GALVA ZINC-ALU
- Zinc coating with sparkling aluminium particles
- Resists 340 hours of salt spray testing (DIN 50021 SS)
- The best compromise between a zinc spray and an aluminium spray
HARD HAT® HEAT RESISTANT AEROSOL
- For continuous temperatures up to 650°C
- For peak temperatures up to 750°C
- For on bare metal or slightly rusted surfaces
- Ideal for engines, heat cannons, pipes, vents, etc.
- To handle after 3 hours (at 20°C)
- Available in black satin-matt and Aluminium
HARD HAT® LINING AEROSOLS
- For use with RUST-OLEUM® line applicators
- Adjustable line width from 5 to 10 cm
- Light traffic possible after just 4 hours
- Adheres to asphalt, concrete, grass, metal, wood, etc.
- Also available in 500 ml
HARD HAT® STAIN BLOCKER
- Matt white finish, best possible opacity (Non-yellowing)
- Touch dry (in 5-10 minutes), Tack-free time: 10 min
- Overcoat time: 30 min
- For application on concrete, plaster, particle board existing coatings, wall paper etc.
- Odourless. Recoatable with standard wall paints
