EPOXYSHIELD® FINE CRACK REPAIR MORTAR

  • Solvent-free Epoxy (2-part)
  • For repairing fine cracks up to 3 mm wide
  • Dry in 3-4 hours
  • Coverage: 25 linear metres (2mm wide, 5mm deep)

EPOXYSHIELD® GARAGE FLOOR COATING

  • 2-part water based epoxy
  • Complete kit including instructions
  • Resists gasoline, antifreeze, motor oil, salt and hot tire pick-up

EPOXYSHIELD® MAXX + ADDITIVES

  • Water based
  • For medium to heavy traffic
  • Easy to apply, no primer required
  • Long-lasting gloss finish (Non-skid or decorative finish optional)
  • Highly resistant against solvents, chemicals and car tyres

EPOXYSHIELD® SEALER

  • Single pack, easy to apply
  • Non yellowing clear finish (gloss)
  • Touch dry after just 1 hour
  • Ideal primer for EpoxyShield® ULTRA coatings

EPOXYSHIELD® ULTRA

  • For light to medium traffic
  • Easy to apply
  • Touch dry after just 2 hours
  • Satin matt finish
  • Good resistance to car tyres and various chemicals

FILLCOAT® FIBRES WATERPROOFING

  • Repairs holes and cracks up to 2mm instantly
  • Faster and cheaper than calling the plumber
  • Excellent adhesion to various substrates
  • Can be applied in all weather conditions
  • Direct repair of gutters, roofs, chimney stacks, pipes and more
  • Bitumen-free formula

FILLCOAT® WATERPROOFING

  • Thick elastic waterproof coating
  • Excellent adhesion to various substrates
  • Can be applied in all weather conditions
  • Renovation of weathered roofs
  • Can be applied by brush, roller or airless
  • Bitumen-free formula

FIX PRIMER

  • Stabilises powdery surfaces
  • Good penetration performance
  • Improves finishing coat adhesion
  • Improves finishing coat coverage
  • Solvent-free and virtually odourless
  • Quick drying

FK111 CLEANER/DEGREASER

  • High-viscosity formulation is ideal for use on walls, does not run off the wall
  • Removes grease, oil, proteins , dirt and many other contaminants
  • Ready-use mixture, can be diluted for light pollution
  • Neutralizes acids and acidic salts
  • Non-flammable, virtually odour-free

GLOSS

  • High opacity
  • Durable gloss retention
  • For interior and exterior use

GRAFFITISHIELD® SPRAY PUMP

  • Application of GraffitiShield Hydro and Wax
  • High quality durable plastic
  • Convenient carry-handle
  • 8 liters volume, with volume stripes
  • Adjustable nozzle

GRAFFITISHIELD CLEANER

  • Effective in minutes
  • Mild aroma
  • Universally effective
  • Suitable for use in closed spaces
  • Removes most paint types

GRAFFITISHIELD HYDRO

  • Ideal for natural stone types
  • Almost invisible result
  • No film building
  • Excellent UV-resistance
  • Transparent protection
  • Waterproof (Hydrophobic)

GRAFFITISHIELD POLYCOAT

  • Hard, smooth surface makes it easy to clean any graffiti on it
  • Solvent-free, low odour
  • Single pack, non-yellowing polyurethane
  • Transparent protection
  • Also useful as a colourless varnish for floors

GRAFFITISHIELD WAX

  • Virtually invisible sacrificial coating for many surface types
  • Biodegradable
  • Resistant against UV and weathering
  • Low solvent content
  • Water vapour permeable

GROUND MARKER FLUORESCENT

  • Optimised for ground marking
  • Spray through cap for ease of use
  • Easier writing
  • Quick drying (5 - 10 minutes)

GROUND MARKER XL RAL

  • Optimised for ground marking
  • Extra large can for more linear metres
  • Two finger nozzle for accurate writing
  • Quick drying (5 - 10 minutes)

HARD HAT® ADHESION PRIMER

  • Ready to recoat after just 30 minutes
  • Unique coverage: 5.5 m² per aerosol
  • To recoat with HARD HAT® topcoats
  • Wide angle spray pattern for a large and even coverage

HARD HAT® ANTI-CORROSION PRIMER

  • Ready to recoat after just 10 minutes, to handle after 30 min.
  • For new or slightly rusty surfaces
  • Penetrates deeply into the surface and does not give rust a chance
  • Grey for light coloured topcoats and red for dark coloured topcoats

HARD HAT® GALVA EXPRESSE

  • Protection and quick drying in one
  • Tack free after just 5 minutes, to handle after 10 minutes
  • Ideal for production and construction environments
  • Resists 400 hours of salt spray testing (DIN 50021 SS)

HARD HAT® GALVA PLUS

  • Appearance similar to new galvanised
  • For touching-up new galvanised
  • Resists 310 hours of salt spray testing (DIN 50021 SS)
  • Lower zinc contents, more aluminium

HARD HAT® GALVA ZINC

  • Cathodic protection of bare and galvanised steel
  • 90% pure zinc in dry paint film
  • Resists 500 hours of salt spray testing (DIN 50021 SS)
  • To recoat within one hour, brush version after 4 hours
  • To recoat with HARD HAT® metallic sprays

HARD HAT® GALVA ZINC-ALU

  • Zinc coating with sparkling aluminium particles
  • Resists 340 hours of salt spray testing (DIN 50021 SS)
  • The best compromise between a zinc spray and an aluminium spray

HARD HAT® HEAT RESISTANT AEROSOL

  • For continuous temperatures up to 650°C
  • For peak temperatures up to 750°C
  • For on bare metal or slightly rusted surfaces
  • Ideal for engines, heat cannons, pipes, vents, etc.
  • To handle after 3 hours (at 20°C)
  • Available in black satin-matt and Aluminium

HARD HAT® LINING AEROSOLS

  • For use with RUST-OLEUM® line applicators
  • Adjustable line width from 5 to 10 cm
  • Light traffic possible after just 4 hours
  • Adheres to asphalt, concrete, grass, metal, wood, etc.
  • Also available in 500 ml

HARD HAT® MARKING AEROSOLS

  • For marking difficult substrates
  • Best opacity, weather-resistant and watertight
  • For on metal, concrete, asphalt, gravel, soil, grass, wood, etc.
  • Even on slightly wet surfaces
  • Upside down spraying system

HARD HAT® STAIN BLOCKER

  • Matt white finish, best possible opacity (Non-yellowing)
  • Touch dry (in 5-10 minutes), Tack-free time: 10 min
  • Overcoat time: 30 min
  • For application on concrete, plaster, particle board existing coatings, wall paper etc.
  • Odourless. Recoatable with standard wall paints

HARD HAT® TOPCOAT FLUORESCENT

  • Highly visible fluorescent coatings
  • Ideal for railings, signs, colour coding etc.
  • First apply matt white 2190 for best results
  • Finish with transparent topcoat for better gloss
  • To handle after 30 minutes (at 20°C)
  • Available in red, orange, yellow, green and blue

HARD HAT® TOPCOAT HEAT RESISTANT

  • For continuous temperatures up to 650°C
  • For peak temperatures up to 750°C
  • For on bare metal or slightly rusted surfaces
  • Ideal for engines, heat cannons, pipes, vents, etc.
  • To handle after 3 hours (at 20°C)
  • Available in black satin-matt and Aluminium

HARD HAT® TOPCOAT METALLIC

  • Gloss or sparkling metallic appearance
  • To restore the metallic look of many different objects
  • For use on bare metal, galvanised, zinc primers or anti-rust primers