• Contact
  • Choose your country

Page 5 of 5.

PRIMER 44HS®

  • Excellent fixation for stabilizing loose particles
  • Prevents porous substrates from absorbing expensive coatings
  • Flexible paint withstands temperature changes
  • Quickly water-resistant (1 hour after application at 20 °C)
  • Can be used on roofs, floors and walls

PVDF PRIMER

  • Excellent adhesion on new or aged PVDF/PVF2 cladding
  • Also suitable for galvanised steel, zinc, aluminium and hard plastics
  • Tack-free after just 30 minutes
  • Single pack, easy to use
  • Primer for Metal Cladding Topcoat, NOXYDE® and NOXYDE® Peganox

SPEED PATCH POURABLE GRADE

  • Accepts heavy traffic 2 hours after application
  • Easy to prepare: add water and mix
  • Possible to apply on slightly wet concrete
  • Sets at low temperatures (5 °C)
  • For deep or shallow repairs

SPEED SCREED

  • Extremely durable
  • Foot traffic possible after 6 hours
  • High mechanical strength
  • Low odour
  • From 3 – 15 mm thickness possible

SUPERGRIP® ANTI-SLIP SPRAY

  • Light duty anti-slip finish
  • Adheres to metal, wood, concrete, tile floors and parquet
  • Also ideal for tools
  • Very quick drying (5-10 minutes)

SUPERGRIP™ TREADSAFE WB

  • Waterbased antislip epoxy resin
  • Fast drying: 2 coats in 1 day
  • Ceramic additves
  • Low maintenance, hard wearing floor finish
  • low VOC-level

SURFA-ETCH® 108

  • Improves the adhesion of coating systems
  • Neutralizes alkaline salts
  • Also ideal to remove ´white rust´ from metal
  • No objectionable odour or fumes
  • Non-flammable

TARMACOAT™

  • Rain-proof and recoatable after just one hour
  • Particularly suitable for tarmac, asphalt and bitumen substrates
  • Can be applied on slightly damp surfaces
  • Excellent resistance to U.V. and weathering
  • Water-based formulation, safe to use and virtually no odour
  • Single pack, no mixing required

THINNER 150

  • Strong thinner
  • Increases flow properties
  • Can also be used to remove glue

THINNER 160

  • Strong dilution capacity
  • Can be used for many Rust-Oleum coatings
  • Also ideal as a strong glue remover

THINNER 190N

  • To prevent foaming (bubbling) in the 9600 paint film
  • For brush and roller application, it is imperative to add 190N thinner

THINNER 191

  • Correct solvent combination for Rust-Oleum polyurethane system 9600
  • Strong diluting capacity
  • Especially for spray applications

THINNER 22

  • Strong dilution capacity

THINNER 633

  • Correct solvent combination for Rust-Oleum products based on alkyd resin binder
  • Highly diluting capacity

THINNER 641

  • Correct solvent combination for Rust-Oleum products based on an alkyd resin binder
  • Strong diluting capacity
  • For spray applications

THINNER RL

  • Odourless

ULTRA-WEAR 400

  • Increases abrasion resistance of coatings
  • Gives a coating a slight traction resistance
  • Can be used for any colour of coating
  • Slightly reduces gloss level of coatings
  • Durable aluminium oxide

VERNAC GLOSS

  • Alkaliresistant
  • Excellent flexibility
  • High weather resistance
  • Transparent
  • Completely colourless
  • Non-yellowing

VERNAC SATIN

  • Alkaliresistant
  • Excellent flexibility
  • High weather resistance
  • Transparent
  • Completely colourless
  • Non-yellowing

X1 CERAMIC ANTI SEIZE SPRAY

  • Prevents seizing and galling
  • Withstands extreme temperatures
  • Water, chemical and weather resistant
  • Insulates, prevents seizure between dissimilar metals

X1 CHAIN & DRIVE SPRAY

  • Good adhesion
  • Resists detergent washing
  • Temperature range: - 35 °C to 180 °C

X1 ELECTRICAL CLEANER

  • Leaves no residue
  • Fast to evaporate
  • Low odour
  • Removes dirt, oil, wax etc

X1 MULTI-PURPOSE SPRAY

  • Stops squeaking
  • Creeping properties
  • Displaces water
  • A film layer is left on the surface after cleaning
  • Does not contain silicon
  • Temperature range: -30 °C to 145 °C
  • Dissolves grease, tar, oil and some adhesives

X1 PTFE SPRAY

  • High anti-wear characteristics
  • Contains PTFE
  • Water repellent
  • Ultra low friction coefficient
  • Temperature range: -40 °C to 120 °C

X1 SILICON SPRAY

  • Dry lubricant
  • Stops squeaking
  • Water resistant and repellent
  • Temperature range: –40 °C to 200 °C

X1 STAINLESS STEEL CLEANER

  • Advanced cleaning and degreasing power
  • Non corrosive and non-abrasive
  • Contains antistatic additives
  • Leaves a microscopic dry to touch protective film

X1 WHITE GREASE

  • Stops squeaking
  • Water repellent
  • Corrosion preventive
  • Suitable for vertical surfaces, will not run

Page 5 of 5.

About us

Services