GRAFFITISHIELD™ HYDRO
- Ideal for natural stone types
- Almost invisible result
- No film building
- Excellent UV-resistance
- Transparent protection
- Waterproof (Hydrophobic)
GRAFFITISHIELD™ POLYCOAT
- Hard, smooth surface makes it easy to clean any graffiti on it
- Solvent-free, low odour
- Single pack, non-yellowing polyurethane
- Transparent protection
- Also useful as a colourless varnish for floors
GRAFFITISHIELD™ WAX
- Virtually invisible sacrificial coating for many surface types
- Biodegradable
- Resistant against UV and weathering
- Low solvent content
- Water vapour permeable
GROUND MARKER FLUORESCENT
- Optimised for ground marking
- Spray through cap for ease of use
- Easier writing
- Quick drying (5 - 10 minutes)
GROUND MARKER XL RAL
- Optimised for ground marking
- Extra large can for more linear metres
- Two finger nozzle for accurate writing
- Quick drying (5 - 10 minutes)
HARD HAT® ADHESION PRIMER
- Ready to recoat after just 30 minutes
- Unique coverage: 5.5 m² per aerosol
- To recoat with HARD HAT® topcoats
- Wide angle spray pattern for a large and even coverage
HARD HAT® ADVANCED
- Top quality Primer & Topcoat in 1
- Strong corrosion protection
- High colour retention
HARD HAT® ANTI-CORROSION PRIMER
- Ready to recoat within 1 hours or after 48 hours, to handle after 30 min.
- For new or slightly rusty surfaces
- Penetrates deeply into the surface and does not give rust a chance
- Grey for light coloured topcoats and red for dark coloured topcoats
HARD HAT® GALVA EXPRESSE
- Protection and quick drying in one
- Tack free after just 5 minutes, to handle after 10 minutes
- Ideal for production and construction environments
- Resists 400 hours of salt spray testing (DIN 50021 SS)
HARD HAT® GALVA PLUS
- Appearance similar to new galvanised
- For touching-up new galvanised
- Resists 310 hours of salt spray testing (DIN 50021 SS)
- Lower zinc contents, more aluminium
HARD HAT® GALVA ZINC
- Cathodic protection of bare and galvanised steel
- 90% pure zinc in dry paint film
- Resists 500 hours of salt spray testing (DIN 50021 SS)
- To recoat within one hour, brush version after 4 hours
- To recoat with HARD HAT® metallic sprays
HARD HAT® GALVA ZINC-ALU
- Zinc coating with sparkling aluminium particles
- Resists 340 hours of salt spray testing (DIN 50021 SS)
- The best compromise between a zinc spray and an aluminium spray
HARD HAT® HEAT RESISTANT AEROSOL
- For continuous temperatures up to 650°C
- For peak temperatures up to 750°C
- For on bare metal or slightly rusted surfaces
- Ideal for engines, heat cannons, pipes, vents, etc.
- To handle after 3 hours (at 20°C)
- Available in black satin-matt and Aluminium
HARD HAT® LINING AEROSOLS
- For use with RUST-OLEUM® line applicators
- Adjustable line width from 5 to 10 cm
- Light traffic possible after just 4 hours
- Adheres to asphalt, concrete, grass, metal, wood, etc.
- Also available in 500 ml
HARD HAT® MARKING AEROSOLS
- For marking difficult substrates
- Best opacity, weather-resistant and watertight
- For on metal, concrete, asphalt, gravel, soil, grass, wood, etc.
- Even on slightly wet surfaces
- Upside down spraying system
HARD HAT® STAIN BLOCKER
- Matt white finish, best possible opacity (Non-yellowing)
- Touch dry (in 5-10 minutes), Tack-free time: 10 min
- Overcoat time: 30 min
- For application on concrete, plaster, particle board existing coatings, wall paper etc.
- Odourless. Recoatable with standard wall paints
HARD HAT® TOPCOAT FLUORESCENT
- Highly visible fluorescent coatings
- Ideal for railings, signs, colour coding etc.
- First apply matt white 2190 for best results
- Finish with transparent topcoat for better gloss
- To handle after 30 minutes (at 20°C)
- Available in red, orange, yellow, green and blue
HARD HAT® TOPCOAT HEAT RESISTANT
- For continuous temperatures up to 650°C
- For peak temperatures up to 750°C
- For on bare metal or slightly rusted surfaces
- Ideal for engines, heat cannons, pipes, vents, etc.
- To handle after 3 hours (at 20°C)
- Available in black satin-matt and Aluminium
HARD HAT® TOPCOAT METALLIC
- Gloss or sparkling metallic appearance
- To restore the metallic look of many different objects
- For use on bare metal, galvanised, zinc primers or anti-rust primers
HARD HAT® TOPCOAT RAL-COLOURS
- Top quality
- For on bare metal, wood and concrete
- To handle after 30 minutes (at 20°C)
- Best available hiding power
- Heat-resistant up to 100 °C
- Available in 45 RAL-colours
HARD HAT® TOPCOAT STAINLESS STEEL
- Greater abrasion resistance
- Better anti-corrosion properties than other metallics
- Excellent UV resistance (does not discolour)
- Resists acids, chemicals and alkalis
HARD HAT® TOPCOAT TRANSPARENT
- Non-yellowing (UV resistant)
- Quick drying (10-15 min.)
- Protective layer for many metal surfaces
- Gloss repair of old coatings
- Provides extra durability to metallic and fluorescent coatings
LEAKSEAL®
- Watertight semi smooth finish
- Can be top-coated with latex or oil-based paints
- For use on metal, aluminum, PVC, concrete, masonry, asphalt roofing materials, etc.
- Overcoatable with various paints
METAL CLADDING PRIMER
- Single pack anti-corrosion primer
- Can be overcoated after just 1 hour
- Water-based product; low in VOC
- For all sound metal substrates and plastisol
- Available in 3 different colours to increase opacity of topcoat
- Excellent flow-out
METAL CLADDING TOPCOAT
- Improves life expectancy of metal cladding
- Easy to clean and maintain
- Excellent flow and aspect with brush, roller or spray
- High filling and hiding power
- Tintable in almost any colour
- Water-based product; low in VOC
MURFILL® QUARTZ
- Excellent resistance against ageing in normal and industrial environment
- Waterproof and water vapour permeable
- Elastic
- Protects steel reinforced concrete against carbonization and corrosion
MURFILL® RENOVATION PAINT
- > 500 % elastic
- Lasting elasticity till -30°C
- Water vapour permeable
- Matt aspect
- Excellent resistance against aging and contamination
- Protects against carbonatation
- Permanently prevents and repairs all micro cracks
MURFILL® RP SILOXAN NF
- Excellent resistance to aging and pollution
- Self-cleaning, hydrophobic
- Pearly effect
- Water vapor permeable
- Very good coverage
- Mineral mat aspect
- Elastic film
MURFILL® WATERPROOFING COATING
- 400 % Elastic
- Waterproof and water vapour permeable
- Excellent colour retention in exterior atmospheric environment
- Protects reinforced concrete against carbonisation and corrosion
- Can be combined with Murfill® fleece for additional mechanical reinforcement and for bridging of (active) cracks
MURFILL® WP INTER
- Waterproofing system
- Acrylate system, very smooth
- Very durable, guarantee
- Very smooth paint film, crack bridging
- Permanently elastic
- Water vapor permeable
- Waterproof
- Very good coverage, satin gloss
- Regularizes the structure of the substrate
