A specially formulated cleaner for removing graffiti from surfaces pretreated with GraffitiShield™ HYDRO and POLYCOAT.

Sacrificial layer based on natural wax. Suitable for a single cleaning process.

Clear, water-based, 2-component polyurethane topcoat for use on wood (inside), concrete and pre-painted surfaces, also serves as an anti-graffiti coating.

This topcoat makes every surface Non-skid in a second. SuperGrip™ Anti-Slip sprays are based on a fast drying acrylic modified short oil alkyd. The coloured products are based on lead- and chromate free pigments and contain a special anti-slip additive. Should be applied on metal, concrete, ceramic and wood surfaces or properly prepared painted substrates.

Two-pack water based anti-slip floor coating for indoor and outdoor application.

Easy to apply solvent based Alkyd anti-slip floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. The coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistance during short contact periods against lubricating oils, fuel, petrol etc.

Very strong epoxy repair mortar for quick and economical repair of deep holes in concrete floors.

Water-based satin gloss 2K polyurethane for a very durable and colourfast finish on metal or floors. Also ideal for doors, stairs, furniture, and as a topcoat for epoxy and acrylic systems.

High build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc.

Water-based single pack hygienic paint protects against normal humidity and contamination indoors. Suitable for walls and ceilings.

Water-based epoxy primer for use on smooth floors, like power-floated concrete and tiles.

Single pack hygienic primer protects (with 8300) against mild chemical exposure, occasional product spillage, frequent chemical cleaning, humidity and moisture. For walls and ceilings.

Durable line marking paint, based on a fast drying short oil alkyd, for drawing lines in parking areas, plants, warehouses, sports fields, stadiums and all sites where traffic control is required.

For quick and easy marking of construction and excavation sites, underground utilities and for traffic safety. Otimised for ground marking. By means of the 360° valve the aerosol is sprayable in all directions. RUST-OLEUM® Spot Marking Aerosol 2800 is based on a fast drying acrylic resin. All products in this range are aromatic free and based on lead- and chromate free pigments.

For quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.

Single pack heat resistant topcoat provides heat resistance up to 425°C dry heat. Nice aluminum finish.

Solvent based acrylic varnish.

Hard Hat® Aerosols Zinc Aluminium Spray Bright Galvanizing 2117 is a fast drying zinc rich primer/topcoat based on an epoxy ester resin. The product contains pure zinc and aluminium as pigment and provides cathodic protection.

Water based quick drying primer for use on all metal substrates including bare or blasted steel, galvanized metal and plastisol®.

Noxyde Tape is a self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene.

Single pack super adhesion primer for PVDF or PVF2, galvanised steel, zinc and aluminum.

Rust-Oleum® CombiColor® Multi-Surface 7300 coating is a solvent based primer and topcoat in one, based on a modified Alkyd binder, providing good adhesion to many types of substrates. The product is lead- and chromate free.

RUST-OLEUM® Hard Hat Aerosol 2102 Adhesion Primer is an adhesion coat based on a solvent containing acrylic.

Designed to fill and seal leaks and cracks on metal, aluminium, galvanized metal, PVC, concrete, masonry, asphalt/bituminous roofing materials, vinyl siding, fiberglass, and more.

Waterborne, ready-to-use aluminum coating for decoration, heat reflection and lasting protection of metal and most bituminous roofs.

Solvent based acrylic varnish.

Flexible and high build acrylic paint for renovation and protection of concrete or terracotta roof tiles.

Water based permanent anti-graffiti coating with hydrophobic properties for mineral substrates.

Filling interlayer for waterproofing system with Murfill® WP Plus NF.

Sacrificial layer based on natural wax. Suitable for a single cleaning process.

Hard-wearing, easy to apply single pack floor coating with PU addition.

Rust-Oleum® CombiColor® Multi-Surface 7300 coating is a solvent based primer and topcoat in one, based on a modified Alkyd binder, providing good adhesion to many types of substrates. The product is lead- and chromate free.

Clear, water-based, 2-component polyurethane topcoat for use on wood (inside), concrete and pre-painted surfaces, also serves as an anti-graffiti coating.